Connecting your devices to a TV with HDMI seems straightforward – plug in the cable and you’re done, right? Not quite. Getting the best performance from your TV actually requires a bit more attention to detail.
Over the years, I’ve discovered several HDMI tricks that significantly improve both picture and sound quality. Here’s what makes a real difference and why it matters for your viewing experience.
1. Choose the Right HDMI Port
When setting up your TV and connected devices – whether it’s a PS5, Blu-ray player, or soundbar – you might assume all HDMI ports are identical. They’re not.
Some ports support higher specifications, like HDMI 2.1 for high refresh rates, and there’s typically one labeled for ARC/eARC (Audio Return Channel) specifically for soundbars and receivers. Using the correct port for each device ensures maximum video and audio quality.
- Identify high-bandwidth ports: Check your TV’s HDMI labels for terms like “4K 120Hz,” “8K,” or “HDMI 2.1.” If you don’t see any labels, they’re likely standard HDMI 2.0. When in doubt, consult your user manual. HDMI 2.1 ports support higher resolutions and frame rates, so connect devices like your PS5 or gaming PC to these ports to unlock advanced features like VRR.
- Use the ARC/eARC port for audio: If you have a soundbar or home theater receiver, plug it into the HDMI port labeled “ARC” or “eARC.” I always use the eARC port on my TVs at home when connecting soundbars because eARC is the newer, higher-bandwidth version that supports uncompressed, high-bitrate audio like Dolby Atmos, DTS:X, and other lossless formats.
- Reserve HDMI 2.0 ports for less demanding devices: Plug older devices, streaming sticks, and cable boxes into your standard HDMI 2.0 ports. This frees up the HDMI 2.1 ports for devices that need more bandwidth. Don’t worry about losing 4K HDR – HDMI 2.0 supports 4K at 60Hz, HDR, and ARC.
2. Use High-Speed HDMI Cables
Choosing the right port is only half the battle – HDMI cables matter just as much.
If you’re still using a decade-old cable, it’s probably not handling your 4K HDR streams as well as a newer one can. The good news? You don’t need expensive cables, just certified, high-quality ones with the right specs.
Check the packaging or label on your cable. Labels like “high speed,” “premium high speed,” or “ultra high speed” indicate its bandwidth. For demanding devices such as gaming consoles and Blu-ray players, I always use “ultra high-speed” HDMI cables (48Gbps), which are rated for HDMI 2.1 features like 4K, 8K, HDR, and Dolby Vision. These cables prevent issues such as flickering and signal loss.
If your devices only support up to 4K at 60Hz, a “premium high-speed” HDMI cable (18Gbps, HDMI 2.0) is perfectly fine. Just avoid really old or thin cables. Early HDMI cables (HDMI 1.4 or older) top out at 1080p or 4K30 and may cause output drops.
One last tip: Try to keep your cables under 10 feet (3 meters) for 4K. If you need a longer run, use an optical HDMI cable.
3. Enable ‘Enhanced’ HDMI Features
Many TVs have individual settings for each HDMI input. Out of the box, they might keep these settings at default, or lower bandwidth, for compatibility. If you suspect you’re not getting HDR or deep colors, check what’s enabled for that port.
The first thing you’ll want to do is look for your TV’s “enhanced” input settings. You can also check your TV’s manual to find them.
Every brand calls it something different. On LG TVs, for instance, there is “HDMI Ultra HD Deep Color.” Samsung TVs have an “Input Signal Plus” or an “HDMI UHD Color” toggle. Meanwhile, Sony has an “Enhanced Format.” Either way, dig into your TV’s settings menu, typically found under Picture settings or External Input settings, to find these enhanced options.
You’ll want to enable them for any input where you’ve connected a device that supports 4K HDR or a high refresh rate.
4. Choose a Picture Mode for Inputs
Getting the best picture quality isn’t just about HDR and UHD deep colors; it also comes down to picture modes. Newer TVs often offer modes labeled as Game, PC, Cinema, Filmmaker, Sports, Vivid, and more. Selecting the right mode can significantly enhance your viewing experience.
Samsung TVs have a Game mode, for instance, which you might want to enable when using your Xbox or PlayStation. It cuts down on input lag by turning off heavy video processing, making gameplay faster and more responsive. TCL TVs have a Movie picture mode (or Filmmaker mode on newer models), which gives you more natural and accurate colors designed to preserve the filmmaker’s intent.
If you see modes like Vivid or Sports, they crank up brightness and contrast and often use motion smoothing. You might not want to use these every day, but they’re easy enough to enable or disable as you wish. Most TVs remember the picture mode per HDMI input, allowing you to keep your streaming device in Filmmaker mode and your console in Game mode.
You can find your TV’s picture modes in settings, usually under Picture or Display and Sound. Check your TV’s manual to be sure.
5. Turn on Features Like ALLM and VRR
If you’re into gaming, two big acronyms to know are ALLM (Auto Low Latency Mode) and VRR (Variable Refresh Rate).
ALLM lets your TV automatically activate Game Mode when a console is playing. You won’t have to manually toggle it every time you switch between gaming and Netflix, as your TV will handle it for you. Check your TV’s manual to see if it supports ALLM (many new models do) and where to enable it.
As for VRR, it matches the TV’s refresh rate to the game’s frame rate in real-time, eliminating screen tearing and stutter.
To use VRR, your TV must support it (look for terms like FreeSync, G-Sync, or VRR). Go into your TV’s picture or general settings and ensure that VRR is enabled for the HDMI port used by your console. On the console side, enable VRR in video settings (both Xbox and PS5 have toggles). Once set, your TV will dynamically adjust its refresh rate to match the game’s output.
6. Use ARC/eARC for Audio
Now that your TV’s picture quality is optimized, let’s focus on audio.
I mentioned this earlier, but if your TV has an HDMI port labeled “ARC” or “eARC,” plug your soundbar into that port. This allows the TV to pass all its audio, from any source or streaming app, to the soundbar.
ARC works fine for basic, compressed formats like Dolby Digital, but eARC is the upgraded version, offering much more bandwidth and support for uncompressed surround sound, lossless formats, and full-quality Dolby Atmos and DTS:X, along with built-in lip-sync correction. ARC uses standard HDMI cables, while eARC works best with ultra high-speed HDMI 2.1 cables.
If you just want simple audio, ARC is sufficient, but if you’re after the best and most immersive sound, eARC is the way to go.
7. Keep Your Ports and Cables Clean
Please keep your HDMI ports clean and take care of your cables. Over time, dust and grime can accumulate in your TV’s ports or on the cable connectors, which can lead to poor contact. A loose or dirty HDMI connection might cause flickering, signal dropouts, or that dreaded “no signal” message. Make it a habit to check and clean your setup, perhaps twice a year.
While cleaning, turn off your TV and any connected devices, then unplug them from the power outlet. You don’t want any live electricity when fiddling with ports. Also, when unplugging HDMI cables from the TV and devices, don’t yank them out. Grip the connector and pull straight out. Avoid wiggling, as this can wear out the port over time.
Use a can of compressed air to blow out any dust from the HDMI ports. A clean, soft brush can help dislodge dust, too. Never stick anything metallic into the port. If you see visible gunk on your HDMI cable’s connectors, wipe the plug gently with a lint-free cloth. For stubborn dirt, dampen a cotton swab with a bit of isopropyl alcohol. Let dry before reconnecting.
You might also take this opportunity to do a little cable management. Use velcro ties or clips to route cables neatly. Avoid sharply bending or crimping HDMI cords. They’re durable, but any cable can fail if pinched too hard. If your TV is wall-mounted or cables do bend sharply, you can always use a right-angle HDMI adapter or a swivel head to reduce strain.
8. Update Your TV and Devices
Last but not least, don’t underestimate the importance of firmware updates. Your TV and HDMI-connected devices should always be running the latest software to ensure you’re getting the best performance and to address any random quirks.
Most smart TVs can automatically update via the internet, but go into your TV’s settings menu and look for a Software Update or Firmware Update option to check and download the latest patches. I make a habit of checking every couple of months. New updates can squash bugs and even add new features or format support. You’ll also want to update your consoles and streaming devices.
Does It Really Matter Which HDMI Port I Use?
Yes. Some HDMI ports support higher bandwidth (like HDMI 2.1 for 4K120, VRR, or 8K), and one is usually labeled ARC/eARC for audio equipment. Plug devices that require the most performance into your TV’s highest-specced ports.
Do I Really Need Newer HDMI Cables?
Yes. If you have a really old cable, it may not be able to handle 4K HDR or high refresh rates. Look for certified “ultra high-speed” HDMI cables (48Gbps, HDMI 2.1) or “premium high-speed” HDMI cables (18Gbps, HDMI 2.0).
